Hot News
- Notes on choosing a switching power supply?
- Can MEAN WELL's power supply be used in the range of 45Hz ~ 440Hz? If YES, what will happen?
- What is minimum load requirement and how can I read it from the spec?
- What is the control mechanism for cooling fans?
- What is "Inrush Current"? What will we notice?
- What is PFC?
- In MEAN WELL's catalog, we see AC and DC at input, what is it all about?
- What is MTBF? Is it distinct from Life Cycle? What is DMTBF?
- What is power good and power fail signals and how can use it?
- What are the protection forms of overload/overcurrent?
How do you select suitable MW LED power supply?
- Author：
- Release time：2025-11-17
- Click：35
Select suitable wattage based on customer's system requirements and application methods. Must also take excess power and driving method into consideration.
For selection key points when using MW power supply to “directly” drive LED lamp refer to LED configuration and installation notes.
For selection key points when using MW power supply in combination with LED driver IC to achieve high precision current control refer to LED configuration and installation notes.
Based on LED power supply's operating environment select suitable IP level and mechanical type (metal enclosure, plastic enclosure, and open frame PCB) for that environment.
Is PFC function required or not? Single stage PFC is only suitable for LED load. Dual stage PFC is suitable for general applications.
If LED system is based on direct drive, units with adjustable voltage and current should be considered for flexibility in changing voltage/current levels. Dimming function may also come in handy when LED brightness control is preferred.
* For those who chose to use single stage PFC products. Refer to What is the difference between single stage
and two stage power supply.